CICA 1993 April/CICA MS Windows - April 1993.iso/unzipped/util/accent/accent.txt

Text File | 1992-11-11 | 13KB | 317 lines

                           Accent  Version 2.0a
                       The Diacritic Key Translator

_____________________________________________________________________________


                               USER'S MANUAL

_____________________________________________________________________________


OVERVIEW

Accent is a Windows application that enables you to input special characters
that are not normally found on a regular keyboard. These characters include
accented characters, called diacritics, and other special symbols such as
the copyright sign "⌐" or the trademark sign "«".

Although Windows supports diacritic characters and extended symbols through
the use of foreign keyboards, only one of these can be installed at a time
and keys assigned to the diacritic characters or extended symbols cannot be
used to display the standard character they normally represent.

In order to display these characters, you must switch back to the standard
keyboard by using the Control Panel International application and select the
US keyboard.  Even when implemented with macros, this process takes time and
is not as transparent as it could be.

One other drawback is that there is no established standard among keyboard
manufacturers; the key assignment on your keyboard may differ from what is
supported by the Windows keyboard DLL. In such cases, the label of a key
will differ from the symbol that is displayed. You then have to either
change the key on your keyboard on stick one of those specialized keycap
label on it.

The alternative to using a non standard keyboard is to have an ANSI
character set chart handy to look-up the value of the special symbol and
enter it with the Alt-0 code sequence.

Accent, when installed and set up properly, will allow you to virtually
enter all the special ANSI symbols directly from your standard keyboard by
using a two-key combination. Since Accent can be customized, it will also
allow you to make key assigments that are consistent with the layout of your
keyboard.

The effects of Accent propagate throughout the system and are available in
all Windows applications.


INSTALLATION

To run Accent, you need Windows version 3.0 or 3.1 running in standard or
enhanced mode. Accent requires 30K of memory to run but only about 15K of
this memory must be resident at all times.

Use the Program Manager, the File Manager or your prefered Shell to run the
INSTALL program. To do this, use the Run command and type:

                x:INSTALL

where x stands for the drive letter of the Accent diskette.

You can change all the defaults that INSTALL assumes before commiting to
installation. In particular, you can select from a list of default Setups
that implement some of Windows keyboard DLLs. Once this selection is made
and Accent installed, you can use the Setup menu to customize Accent to
your liking.

If you have been using Accent Version 1.5 and you want that Setup, select
"Version 1.5 Setup" as the Setup to install.

INSTALL will copy all the required files to the path you have specified,
build the required Setup and start Accent Version 2.0a. If you have set
the "Load Accent automatically when starting Windows" check box on,
INSTALL will append the string "\path\accent.exe" to the "LOAD=" command
line of your WIN.INI file.

SETTING UP ACCENT

Hot Key

Switching the translation mode of Accent to ON or OFF is done through the
use of a Hot Key.  The translation mode is reflected by the Icon, which
displays the accented letter "Γ" when ON.

Mode switching occurs as soon as you hit the Hot Key combination (no macro
execution to perform and slow you down) and is available in all Windows
applications.

The Hot Key is a combination of the Ctrl key (the use of Alt and Shift key
is optional) with any key in the range A-Z typed simultaneously.

You can choose the Hot Key you want from the drop down list box of the Setup
menu. The default Hot Key is Ctrl-T.

Translation mode

The translation mode check box can be used to switch Accent's operation. It
also sets the mode Accent is in when first started.

Beeps

The Beeps check box will instruct Accent to beep you PC speaker when the
translation mode is switched: two beeps will sound for OFF mode, and three
beeps for ON mode. This is very handy and allows you to know in which mode
Accent is in when you are working on a full screen document and Accent's
Icon is not visible.

Diacritic Keys

Accent can translate all the diacritic symbols that are found in the ANSI
character set.

In order to do this, you select one of your keyboard keys to act as a dead
key representing the accent you want. You then type this key followed by the
character you want as a diacritic.

The Setup menu has four edit fields per diacritic key. The first two edit
fields, labeled "Char" allow you to enter the shifted and unshifted
character of the key so that the key will act as a dead key in both shifted
or unshifted state.

If you have an enhanced keyboard, you can use the next two edit fields
labeled "Alt Char" to specify the accent. In this mode, you need to press
the key labeled Alt-Char on your keyboard (or the right-hand Alt key)
together with the key you dedicated as a dead key for the accent in order
to display the diacritic. Here also you can enter the shifted and unshifted
character for the key to act as a dead key in both states.

The requirement of using shifted and unshifted keys is optional. If only one
character is specified in either the "Char" or "Alt Char" entries, then only
that character will act as a dead key.

As an example, if you have assigned the key representing the "/" and "?" as
"Char" characters to act as the dead key for the acute accent , then typing
"/" or "?"  followed by the uppercase letter "E " will give you the "╔"
symbol. If you have assigned these characters in the "Alt Char" entries,
then typing the right-hand Alt key simultaneously with either "/" or "?"
then typing the uppercase letter "E" will give you "╔".

The symbol of a key assigned as a dead key is still available however,
either by typing the key twice in succession or, if the character is not an
"Alt Char" character, by using the Hot Key to disable the translation mode
of Accent.

The following table shows the diacritic symbols Accent can generate:

            Characters
      Accent
    1-Acute:    ß  Θ  φ  ≤  ·  ²  ┴  ╔  ═  ╙  ┌  ▌
    2-Grave:    α  Φ  ∞  ≥  ∙  └  ╚  ╠  ╥  ┘
    3-Circumflex:    Γ  Ω  ε  ⌠  √  ┬  ╩  ╬  ╘  █
    4-Umlaut:    Σ  δ  ∩  ÷  ⁿ     ─  ╦  ╧  ╓  ▄
    5-Tilde:         π  ⌡  ├  ╒  ±  ╤
    6-A ring:    σ  ┼
    7-Cedilla:    τ  ╟

Aliases

Accent can also translate special symbols by remapping standard keyboard
keys.

You tell Accent which character you want translated by using the Aliases
table. The table can support 120 entries and is displayed in groups of 24
entries in two columns. Each entry consist of a double edit field. You use
the first edit field to identify the key you want to remap, the second edit
field tells Accent what symbol to display.

At the bottom of the Aliases table are two directional push buttons that
allow you to scan the table. Each push of a button will shift the table 12
entries in the direction of the button. The button will beep if your are at
the beginning or the logical end of the table. The logical end of the table
is defined as the end of entries you have made, not the 120th entry, but
otherwise will always display the next 12 free entries so you can enter new
data.

As an example, if you need to represent amounts of money in Japanese yen,
you could assign the "$" symbol to be translated to "Ñ". Whenever you type
a "$" with Accent translation enabled, a "Ñ" will be displayed.

If you need to display the actual dollar sign, toggle Accent translation
mode to OFF with the Hot Key.

One other way of generating special symbols is to assign an alias to an
unused diacritic symbol. Assuming you have setup Accent to generate umlaut
diacritic symbols and that you don't require all of them, you might use one
that is not needed to be translated to something else.

In the above example, you could have requested the diacritic " " to have "Ñ"
as an alias. This is done by typing the dead key assigned for the umlaut and
then the lowercase letter "y". Accent will generate the diacritic " " and
replace it with the alias "Ñ".

Alternates

If you have an enhanced keyboard, you can use the Alternates table to
generate special symbols.

The Alternates table works with the extended Alt key (the right-hand Alt
key) but otherwise has the same functionality as the Aliases table. The
table can support up to 120 entries and can be scanned with the two
directional buttons at the buttom in exactly the same way you do with the
Aliases table.

For instance, if you decide to set the alternate to the lowercase letter "c"
be the copyright symbol "⌐", then by typing the right-hand Alt key together
with the letter "c" will generate the "⌐" symbol.

Here also you can redirect unused diacritics to have alternates as you can
with the Aliases table. The only requirement is that the diacritics be
defined in the "Alt Char" entries of the Diacritic Keys table.

The functionality of the Alt key for Windows operation (menu selection and
accelerators) is still available by using the left-hand Alt key. The
Extended Alt key is captured by Accent when translation mode is ON, but is
otherwise available to Windows.

Num Keypad

Accent normally remaps keys from the main keyboard. You can use the Num
Keypad table to remap keys from the numeric keypad. The extended Alt key
does not apply to the Num Keypad table since it is reserved to enter the
Alt-0 code sequence.

Extended Char

You can use the Extended Char table to enter a special symbol in an edit
field. You can do that either by entering the Alt-0 code sequence given in
the table or you can do it directly: to do a direct entry, position the
cursor in an edit field and then click an entry in the Extended Char table
(or use the Alt-x menu selector). The edit field  will display the symbol
you have selected. You can move around in the table with the mouse or the
direction keys. To confirm your selection, double-click the symbol or type
<cr>; to cancel your selection and delete the edit field symbol, type the
escape key.

OK button

The OK button is used to exit the Setup menu.

Save button

The Save button is used to save your Setup. The Setup is saved in the
WIN.INI file. This is the Setup that will be used the next time you start
Accent.

Keyboard button

You can use the Keyboard button to load one of the predefined keyboards
supported by Accent. Clicking this button will bring up a dialog box with
the following controls:

    Keyboard Selection: displays the list of supported keyboards.

    Load Selection: set the Setup to the selected Keyboard Selection.

    Erase Setup: erases the Setup.

    Undo: resets the Setup to the one recorded in the WIN.INI file. This
              button is disabled if the Setup has not been modified.

    Cancel: exit the Keyboard Selection dialog.

Help button

The help button will provide online help on the use of Accent.


DISTRIBUTION

Accent is distributed as SHAREWARE. You may make copies of the software and
give it to whomever you wish as long as you do not alter it in any way and
that you copy all the files, including this manual.

The program is provided "as is" with no warranty of any kind. It is your
responsibility to decide if this software is suitable for your use.


REGISTRATION

To remove the annoyance of using an unregistered copy of Accent, you are
invited to register it with pro++ Software. Registration entitles you to
receive the latest version of Accent on disk and grants you a non-exclusive
license to use Accent on one machine. It will also enable pro++ Software to
notify you of future updates and enhancements.

To register, send $25.00 US (S & H included) or equivalent CDN funds in
cheque or money order to:

            pro++ Software
            8045 Saguenay
            Brossard, Qc
            J4X 1N2  CANADA

Please make cheque or money order payable to pro++ Software. Allow 3 weeks
for personal cheque to clear the bank.

You can also register with Public (software) Library with your MC, Visa,
AmEx or Discover card by calling 800-242-4PsL (from overseas: 713-524-6394)
or by FAX to 713-524-6398 or by CompuServe to 71355,470. Please quote item
#10613 for faster processing. THESE NUMBERS ARE FOR REGISTERING ONLY.
pro++ Software cannot be reached at those numbers.

To contact pro++ Software for information about dealer pricing, volume
discounts, site licensing, the status of shipment of the product, the
latest version number or for technical information, call 514-465-9306 or
write to the above address.

Comments and suggestions are welcome and can be mailed to the above address
or forwarded via Compuserve at 72571,724.

_____________________________________________________________________________


Copyright ⌐ 1992, pro++ Software.
Windows is a trademark of Microsoft Corporation.